Sunday, February 18, 2018

RHYPERIOR TANK

This is an adaptation of my Rhyperior pattern to make him look like a tank.  I replaced him legs with tank wheels.

MATERIALS:
Worsted Weight Yarn:  Charcoal, gray, greybeard, aqua, white, and red.
E crochet hook
Polyester Fiberfil
Tapestry needle
Glue

FINGERS (MAKE 6):
Rd 1: With gray, ch 2, 4 sc in second ch from hook working around ch.  (4)
Rd 2: sc in each sc around.  (4)
Rd 3: (sc in next sc, 2 sc in next sc) around.  (6)
Finish off.

BREASTPLATE:
Rw 1: With gray, ch 5, 2 sc in second ch from hook, sc in next 2 ch, 2 sc in next sc.  (6)
Rw 2: Ch 1, turn; 2 sc in next sc, sc in next 4 sc, 2 sc in next sc.  (8)
Rw 3: Ch 1, turn; 2 sc in next sc, sc in next 6 sc, 2 sc in next sc.  (10)
Rw 4: Ch 1, turn; sc in each sc across.  (10)
Finish off.

ARMS (MAKE 2):
Rd 1: With charcoal, 6 sc in magic ring, slip st in first sc.  (6)
Rd 2: Ch 1, 2 sc in each sc around, slip st in first sc changing to gray.  (12)
Rd 3: Ch 1, sc in next 3 sc working through both thicknesses of ARM and FINGER 1, sc in next 3 sc working through both thicknesses of ARM and FINGER 2, sc in next 3 sc working through both thicknesses of ARM and FINGER 3, sc in next 3 sc in just ARM, slip st in first sc changing to charcoal.  (12)
Rd 4: Ch 1, (sc in next sc, 2 sc in next sc) around, slip st in first sc.  (18)
Rds 5-7: Ch 1, sc in each sc around, slip st in first sc.  (18)
Rd 8: Ch 1, (sc in next 2 sc, extended popcorn st in next sc) around, slip st in first sc changing to gray.
Rd 9: Ch 1, (sc in next 4 sc, sc2tog) around, slip st in first sc.  (15)
Rd 10: Ch 1, sc in each sc around, slip st in first sc.  (15)
Rd 11: Ch 1, sc in each sc around, slip st in first sc changing to charcoal.  (15)
Rds 12-14: Ch 1, sc in each sc around, slip st in first sc.  (15)
LEFT ARM:
Rd 15: Ch 1, sc in next 2 sc, slip st in next 3 sc, sc in next 10 sc, slip st in first sc.
Rd 16: Ch 1, sc in next 2 sc, ch 3, skip next 3 slip st, sc in next 10 sc, slip st in first sc.  (ARMHOLD MADE)
Rd 17: Ch 1, sc in each sc and ch around.  (15)
RRIGHT ARM:
Rd 15: Ch 1, sc in next 12 sc, leaving remaining sc unworked.  (12)
Rd 16: Ch 1, turn; sc in next 12 sc, ch 3, slip st in first sc.  (12) (ARMHOLD MADE)
Rd 17: Ch 1, turn; sc in each sc and ch around.  (15)
BOTH ARMS:
Rds 18-19: sc in each sc around.  (15)
Rd 20: sc in next 6 sc, (sc2tog) twice, sc in next 5 sc.  (13)
Rd 21: sc in next 6 sc, sc2tog, sc in next 5 sc.  (12)
BEGIN STUFFING ARM.  ADD STUFFING AS YOU CONTINUE.
Rd 22: sc in next 5 sc, (sc2tog) twice, sc in next 3 sc.  (10)
Rd 23: sc in each sc around.  (10)
Rd 24: sc in next 5 sc, sc2tog, sc in next 3 sc.  (9)
Rd 25: sc in next 4 sc, (sc2tog) twice, sc in next sc.  (7)
Rd 26: sc in next 4 sc, sc2tog, sc in next sc.  (6)
Rd 27: sc in each sc around.  (6)
Finish off leaving a long tail.  Weave tail through sc of Rd 27, pull tight, and secure.  Weave in ends.  Using gray, French knot in every other stitch of Rd 10.

SHOULDER:
Rd 1: Working around ARMHOLE, evenly complete 10 sc around ARMHOLE.  (10)
Rds 2-6: sc in each sc around.  (10)  Mark st #2 of Rd 6 of SHOULDER.
Finish off.

LARGE ARM PODS (MAKE 2):
Rw 1: With charcoal, ch 4, 2 sc in second ch from hook, sc in next ch, 2 sc in next ch.  (5)
Rw 2: Ch 1, turn; sc in each sc across.  (5)  Change to gray.
Rws 3-4: Ch 1, turn; sc in each sc across.  (5)
Rw 5: Working in back loops only, ch 1, turn; sc2tog, sc in next sc, sc2tog.  (3)
Rw 6: Ch 1, turn; sc3tog.  (1)
Finish off leaving a long tail.  Sew LARGE ARM PODS to ARMS stuffing before closing.

SMALL ARM PODS (MAKE 2):
Rw 1: With charcoal, ch 3, 2 sc in second ch from hook, 2 sc in next ch.  (4)  Change to gray.
Rws 2-3: Ch 1, turn; sc in each sc across. (4)
Rw 4: Ch 1, turn; sc2tog, sc2tog.  (2)
Finish off leaving a long tail.  Sew SMALL ARM PODS to ARMS adding a small amount of stuffing before closing.

TANK LEGS SIDES (MAKE 2):
Rw 1: With charcoal, ch 46, sc in second ch from hook and in each ch across.  (45)
Rws 2-8: Ch 1, turn; sc in each sc across.  (45)
Finish off leaving a long tail.  Sew TANK SIDES to TANK FRONT AND BACK.

TANK LEGS FRONT AND BACK (MAKE 4):
Rw 1: With charcoal, ch 26, 2 sc in second ch from hook, sc in next 22 ch, sc2tog.  (25)
Rw 2: Ch 1, turn; sc in each sc across.  (25)
Rw 3: Ch 1, turn; 2 sc in next sc, sc in next 22 sc, sc2tog.  (25)
Rw 4: Ch 1, turn; sc in each sc across.  (25)
Rw 5: Ch 1, turn; 2 sc in next sc, sc in next 22 sc, sc2tog.  (25)
Rw 6: Ch 1, turn; sc in each sc across.  (25)
Rw 7: Ch 1, turn; 2 sc in next sc, sc in next 22 sc, sc2tog.  (25)
Rw 8: Ch 1, turn; sc in each sc across.  (25)
Rw 9: Ch 1, turn; 2 sc in next sc, sc in next 22 sc, sc2tog.  (25)
Rw 10: Ch 1, turn; sc in each sc across.  (25)
Rw 11: Ch 1, holding side of Rw 10 and first sc on TANK LEGS SIDES together and working through both thicknesses, sc in each sc across.  (45)
Finish off.  Weave in ends.

LARGE WHEELS (MAKE 6):
Rd 1: With charcoal, ch 2, 4 sc in second ch from hook working around ch, slip st in first sc changing to gray.  (4)
Rd 2: Ch 1, 2 sc in each sc around.  (8)
Rd 3: (sc in next sc, 2 sc in next sc) around.  (12)
Finish off.  Weave in ends.  Glue LARGE WHEELS to TANK LEG FRONTS.

MEDIUM WHEELS (MAKE 4):
Rd 1: With charcoal, ch 2, 6 sc in second ch from hook working around ch, slip st in first sc changing to gray.  (6)
Rd 2: Ch 1, 2 sc in each sc around.  (12)
Finish off.  Weave in ends.  Glue MEDIUM WHEELS to TANK LEG FRONTS.

SMALL WHEELS (MAKE 2):
Rd 1: With charcoal, ch 2, 4 sc in second ch from hook working around ch, slip st in first sc changing to gray.  (4)
Rd 2: Ch 1, 2 sc in each sc around.  (8)
Finish off.  Weave in ends.  Glue SMALL WHEELS to TANK LEG FRONTS.

TANK LEG SPIKES (MAKE 8):
Rd 1: With greybeard, ch 2, 4 sc in second ch from hook working around ch.  (4)
Rd 2: sc in each sc around.  (4)
Rd 3: (sc in next sc, 2 sc in next sc) around.  96)
Finish off.  Weave in ends.

TANK LEG COVER SIDES (MAKE 8):
Rw 1: With gray, ch 11, 2 sc in second ch from hook, sc in next 7 sc, sc2tog.  (10)
Rw 2: Ch 1, turn; sc in each sc across.  (10)
Rw 3: Ch 1, turn; 2 sc in next sc, sc in next 7 sc, sc2tog.  (10)
Finish off.  Weave in ends.

TANK LEG COVER FRONT (MAKE 2):
Rw 1: With gray, ch 11, sc in second ch from hook and in each ch across.  (10)
Rw 2: Ch 1, turn; sc in next 2 sc, change to greybeard, sc in next 6 sc, change to gray, sc in next 2 sc.  (10)
Rw 3: Ch 1, turn; sc in next sc, change to greybeard, sc in next 8 sc, change to gray, sc in next sc.  (10)
Finish off leaving a long tail.  Sew TANK LEG COVER FRONT to TANK LEG COVER SIDES

TANK LEG COVER TOP (MAKE 2):
Rw 1: With greybeard, ch 11, sc in second ch from hook and in each ch across.  (10)
Rws 2-: Ch 1, turn; sc in each sc across.  (10)
Finish off leaving a long tail.

TANK LEG COVER BACK (MAKE 2):
Rw 1: With gray, ch 11, sc in second ch from hook and in each ch across.  (10)
Rws 2-3: Ch 1, turn; sc in each sc across.  (10)
DON NOT FINISH OFF.  Sew TANK LEG COVER BACK to TANK LEG COVER SIDES.

iTANK LEGS COVER UPPER SECTION (MAKE 2):
Rd 1: Continuing with TANK LEG COVER BACK, holding next sc on TANK LEG COVER BACK and side of TANK LEG SIDES together and working through both thicknesses, sc in next 10 sc, sc in next sc of TANK LEG COVER SIDES, holding next sc on TANK LEG COVER SIDES and first sc on of TANK LEG FRONT or BACK together and working through both thicknesses, sc in next 9 sc, sc in next 7 sc on TANK LEG FRONT or BACK, holding next sc on TANK LEG FRONT or BACK and first sc on TANK LEG COVER SIDES together and working through both thicknesses, sc in next 3 sc, change to greybeard, sc2tog, holding first sc on TANK LEG COVER FRONT and side of TANK LEGS SIDES together and working through both thicknesses, sc in next 10 sc, working in sc of TANK LEG COVER SIDES, sc2tog, holding next sc on TANK LEG COVER SIDES and next sc on TANK LEGS FRONT or BACK together and working through both thicknesses, sc in next 5 sc, change to gray, sc in next 3 sc, sc in next 7 sc on TANK LEGS FRONT or BACK, holding next on TANK LEGS FRONT or BACK and first sc on TANK LEG COVER SIDES together and working through both thicknesses, sc in next 9 sc, sc in next sc on TANK LEG COVER SIDES, slip st in first sc.
Rd 2: Ch 1, turn; sc in next 19 sc, change to greybeard, sc in next 8 sc, holding next sc on TANK LEGS COVER UPPER SECTION and first sc on TANK LEG SPIKES together and working through both thicknesses, sc in next 3 sc, sc in next 2 sc on TANK LEGS COVER UPPER SECTION, holding next sc on TANK LEGS COVER UPPER SECTION and first sc on TANK LEG SPIKES together and working through both thicknesses, sc in next 3 sc, sc in next 8 sc on TANK LEGS COVER UPPER SECTION, change to gray, sc in next 29 sc, slip st in first sc.
Rd 3: Ch 1, turn; sc in next 28 sc, change to greybeard, sc in next 6 sc, sc2tog, sc in next sc, sc in next 3 sc on TANK LEG SPIKES, sc in next 2 sc, sc in next 3 sc on TANK LEG SPIKES, sc in next sc, sc2tog, sc in next 6 sc, change to gray, sc in next 18 sc, slip st in first sc.
Rd 4: Ch 1, turn; sc in next 17 sc, change to greybeard, sc in next 9 sc, holding next sc on TANK LEGS COVER UPPER SECTION and first sc on TANK LEG SPIKES together and working through both thicknesses, sc in next 3 sc, sc in next 2 sc on TANK LEGS COVER UPPER SECTION, holding next sc on TANK LEGS COVER UPPER SECTION and first sc on TANK LEG SPIKES together and working through both thicknesses, sc in next 3 sc, sc in next 9 sc, change to gray, sc in next 27 sc, slip st in first sc.
Rd 5: Ch 1, turn; sc in next 26 sc, change to greybeard, sc in next 7 sc, sc2tog, sc in next sc, sc in next 3 sc on TANK LEG SPIKES, sc in next 2 sc, sc in next 3 sc on TANK LEG SPIKES, sc in next sc, sc2tog, sc in next 6 sc, change to gray, sc in next16 sc, slip st in first sc.
SEW TANK LEG COVER TOP ON.
Rd 6: Ch 1, turn; sc2tog, sc in next 14 sc, sc in next 10 sc on TANK LEG COVER TOP, sc in next 14 sc on TANK LEG COVER UPPER SECTION, sc2tog, sc in next 10 sc, slip st in first sc.  (50)
Rd 7: Ch 1, turn; sc in next 10 sc, sc2tog, sc in next 36 sc, sc2tog, slip st in first sc.  (48)
Finish off.  Weave in ends.  Stuff TANK LEGS firmly.  Tack stitch the TANK LEGS COVER SIDES down.

BODY:
Rd 1: With charcoal, 8 sc in magic ring.  (8)
Rd 2: 2 sc in each sc around.  (16)
Rd 3: (sc in next sc, 2 sc in next sc) around.  (24)
Rd 4: (sc in next 2 sc, 2 sc in next sc) around.  (32)
Rd 5: (sc in next 3 sc, 2 sc in next sc) around.  (40)
Rd 6: (sc in next 4 sc, 2 sc in next sc) around.  (48)
Rds 7-14: sc in each sc around.  (48)
Rd 15: sc in next 5 sc, holding next sc on BODY and first sc on RIGHT LEG together and working through both thicknesses, sc in next 14 sc, sc in next 10 sc on BODY, holding next sc on BODY and marked sc on LEFT LEG together and working through both thicknesses, sc in next 14 sc, sc in next 5 sc on BODY.
Rd 16: sc in next 5 sc, sc in next 8 sc on RIGHT LEG, sc2tog, sc in next 14 sc, sc2tog, sc in next 8 sc, sc in next 10 sc on BODY, sc in next 8 sc on LEFT LEG, sc2tog, sc in next 14 sc, sc2tog, sc in next 8 sc, sc in next 5 sc on BODY.  (84)
Rd 17: (sc in next 12 sc, sc2tog) around.  (78)
Rd 18: (sc in next 11 sc, sc2tog) around.  (72)
Rd 19: (sc in next 10 sc, sc2tog) around.  (66)
Rd 20: sc in each sc around.  (66)
Rd 21: (sc in next 9 sc, sc2tog) around.  (60)
Rd 22: (sc in next 8 sc, sc2tog) around.  (54)
Rd 23: (sc in next 7 sc, sc2tog) around.  (48)
Finish off.
Rd 24: Skip next 29 sc, attach charcoal in next sc, ch 1, sc2tog, sc in next 3 sc, sc2tog, sc in next 2 sc, holding next sc of BODY and first sc on LEFT SHOULDER together and working through both thicknesses, sc in next 3 sc, sc in next 22 sc on BODY, holding next sc of BODY and sc #7 on RIGHT SHOULDER together and working through both thicknesses, sc in next 3 sc, sc in next 2 sc of BODY, sc2tog, sc in next 3 sc, sc2tog.
Rd 25: Ch 1, turn; sc2tog, sc in next 2 sc, sc2tog, sc in next sc, sc in next unworked sc on SHOULDER, working behind  same SHOULDER, sc in next sc, ch 1, skip next sc, sc in next sc, skip next 5 sc on same SHOULDER, sc in next sc, sc2tog on BODY, sc in next 18 sc, sc2tog, sc in next unworked sc on SHOULDER, working behind same SHOULDER, sc in next sc, ch 1, skip next sc, sc in next sc, skip next 5 sc on same SHOULDER, sc in next sc, sc in next sc on BODY, sc2tog, sc in next 2 sc, sc2tog.
Rd 26: Ch 1, turn; Ch 1, turn; sc in next sc, sc2tog, sc in next 3 sc, sc in next skipped sc on SHOULDER, working behind same SHOULDER, sc in next sc, ch 2, sc in next sc, skip next 3 sc on same SHOULDER, sc in next sc, sc in next sc, sc2tog, sc in next 16 sc, sc2tog, sc in next skipped sc on SHOULDER, working behind same SHOULDER, sc in next sc, ch 2, sc in next sc, skip next 3 sc on same SHOULDER, sc in next sc, sc in next 3 sc on BODY, sc2tog, sc in next sc.
Rd 27: Ch 1, turn; sc in next 2 sc, sc2tog, sc in next 2 sc, sc in next 3 sc on SHOULDER, sc in next 2 sc on BODY, sc2tog, sc in next 14 sc, sc2tog, sc in next 2 sc, sc in next 3 sc on SHOULDER, sc in next 2 sc on BODY, sc2tog, sc in next 2 sc.  (36)
FINISH OFF LEAVING A LONG TAIL.  USING TAIL, SEW BREASTPLATE IN PLACE OVERLAPING OUTSIDE EDGE OF BREASTPLATE AND INSIDE EDGE OF BODY BY 1 SC.
BEGIN STUFFING BODY.  CONTINUE TO ADD STUFFING AS YOU GO.
Rd 28: Attach charcoal in center back, ch 1, sc in next 8 sc, sc2tog, sc in next 3 sc, sc2tog, sc in next 2 sc, sc in next sc working through both thicknesses of next sc of BODY and first sc of BREASTPLATE, sc in next 8 sc of BREASTPLATE, sc in next sc working through both thicknesses of next sc of BODY and last sc of BREASTPLATE, sc in next 2 sc on BODY, sc2tog, sc in next 3 sc, sc2tog, sc in next 8 sc.  (40)
Rd 29: sc in next 7 sc, sc2tog, sc in next 3 sc, sc2tog, sc in next 12 sc, sc2tog, sc in next 3 sc, sc2tog, sc in next 7 sc.  (36)
Rd 30: sc in next 6 sc, sc2tog, sc in next 3 sc, sc2tog, sc in next 10 sc, sc2tog, sc in next 3 sc, sc2tog, sc in next 6 sc.  (32)
Rd 31: sc in next 5 sc, sc2tog, sc in next 3 sc, sc2tog, sc in next 8 sc, sc2tog, sc in next 3 sc, sc2tog, sc in next 5 sc.  (28)
Rds 32-33: sc in each sc around.  (28)
Rd 34: (sc in next 5 sc, sc2tog) around.  (24)
Rd 35: (sc in next 4 sc, sc2tog) around.  (20)
Rd 36: (sc in next 3 sc, sc2tog) around.  (16)
Rd 37: (sc in next 2 sc, sc2tog) around.  (12)
Rd 38: (sc in next sc, sc2tog) around.  (8)
Finish off leaving a long tail.  Weave tail through sc of Rd 38, pull tightly, and secure.  Weave in ends.

CHEST TRIANGLE:
Rw 1: With aqua, ch 6, sc in second ch from hook and in each ch across.  (5)
Rw 2: Ch 1, turn; sc2tog, sc in next 3 sc.  (4)
Rw 3: Ch 1, turn; sc2tog, sc in next 2 sc.  (3)
Rw 4: Ch 1, turn; sc2tog, sc in next sc.  (2)
Rw 5: Ch 1, turn; sc2tog.  (1)
Finish off.
NOW WORKING IN ROUNDS.
Rd 1: Working in free loops of foundation ch, attach gray in 3th ch, ch 1, sc in same ch as attachment, sc in next ch, 3 sc in next ch working around corner, working in side of Rws, sc in next 3 Rws, 3 sc in next corner, sc in next 3 Rws, 3 sc in next corner, sc in next ch, slip st in first sc.  (18)
Rd 2: Working in back loops only, ch 1, sc in each sc around, slip st in first sc changing to charcoal.  (18)
Rd 3: Ch 1, (sc in next 3 sc, change to gray, extended popcorn st, change to charcoal, sc in next 2 sc) 3 times, slip st in first sc.  (18)
Rds 4-5: Ch 1, sc in each sc around, slip st in first sc.  (18)
Rd 6: Ch 1, (sc in next 3 sc, change to gray, extended popcorn st, change to charcoal, sc in next 2 sc) 3 times, slip st in first sc.  (18)
Finish off leaving a long tail.  Sew CHEST TRAINGLE to BODY stuffing before closing.

FACE:
Rd 1: With charcoal, 6 sc in magic ring.  (6)
Rd 2: 2 sc in next sc, sc in next sc, 2 sc in next 2 sc, sc in next sc, 2 sc in next sc.  (10)
Rd 3: (2 sc in next sc, sc in next sc) twice, 2 sc in next 2 sc, sc in next 3 sc, 2 sc in next sc.  (15)
Rd 4: 2 sc in next sc, sc in next 2 sc, 2 sc in next 2 sc, sc in next 2 sc, 2 sc in next 2 sc, sc in next 5 sc, 2 sc in next sc.  (21)
Rd 5: hdc in next 4 sc, 2 hdc in next sc, hdc in next 2 sc, 2 hdc in next sc, hdc in next 4 sc, sc in next 9 sc.  (23)
Rd 6: sc in next 2 sts, hdc in next 10 sts, sc in next 11 sts.  (23)
Rd 7: hdc in next 2 sts, dc in next 2 sts, 2 dc in next st, dc in next 4 sts, 2 dc in next st, dc in next 2 sts, hdc in next 2 sts, sc in next 9 sts.  (25)
Finish off leaving a long tail.  Sew FACE to BODY adding stuffing before closing.

LARGE HORN:
Rd 1: With gray, ch 2, 4 sc in second ch from hook working around ch.  (4)
Rd 2: sc in each sc around.  (4)
Rd 3: (sc in next sc, 2 sc in next sc) around.  (6)
Rd 4: sc in each sc around.  (6)
Rd 5: (sc in next 2 sc, 2 sc in next sc) around.  (8)
Rd 6: sc in each sc around.  (8)
Rd 7: sc in next 4 sc, dc in next 4 sc.  (8)
Finish off leaving a long tail.  Sew LARGE HORN to FACE adding stuffing before closing.

SMALL HORN:
Rd 1: With gray, ch 2, 4 sc in second ch from hook working around ch.  (4)
Rd 2: sc in each sc around.  (4)
Rd 3: (sc in next sc, 2 sc in next sc) around.  (6)
Finish off leaving a long tail.  Sew SMALL HORN to FACE adding stuffing before closing.

MOUTH, TEETH, AND EYES:
Embroider MOUTH, TEETH, and EYES on RHYPERIOR.

HELMET:
Rd 1: With gray, 6 sc in magic ring.  (6)
Rd 2: 2 sc in each sc around.  (12)
Rd 3: (sc in next 2 sc, 2 sc in next sc) around.  (16)
Rd 4: (sc in next 3 sc, 2 sc in next sc) around.  (20)
Rd 5: slip st in next sc, ch 1, turn; skip next slip st, sc in next 2 sc, (2 sc in next sc, sc in next 3 sc) 4 times, slip st in next sc.  (22)
Rd 6: Ch 1, turn; skip next slip st, sc2tog, sc in next sc, (2 sc in next sc, sc in next 4 sc) 3 times, 2 sc in next sc, sc in next sc, sc2tog.  (24)
Rd 7: Ch 1, turn; sc2tog, sc in next 4 sc, (2 sc in next sc, sc in next 3 sc) 4 times, sc2tog.  (26)
Rds 8-9: Ch 1, turn; sc in each sc around.  (26)
Rd 10: Ch 1, turn; 2 sc in next sc, sc in next 24 sc, 2 sc in next sc.  (28)
Finish off leaving a long tail.  Sew HELMET to BODY.

TAIL SPIKES (MAKE 13):
Rd 1: With gray, 4 sc in second ch from hook working around ch.  (4)
Rd 2: sc in each sc around.  (4)
Finish off.  Weave in ends.

TAIL:
Rd 1: Attach charcoal in first sc on TAIL SPIKE, ch 1, sc in same sc as attachment, 2 sc in next sc, sc in next sc, 2 sc in next sc.  (6)
Rd 2: 2 sc in each sc around.  (12)
Rd 3: (holding next sc on TAIL and first sc on TAIL SPIKE together and working through both thicknesses, sc in next 2 sc, sc in same sc as last sc, sc in next sc, 2 sc in next sc) 3 times.
Rd 4: (sc in next 2 sc on TAIL SPIKE, 2 sc in next sc on TAIL, sc in next 2 sc, 2 sc in next sc) 3 times.
Rd 5: (sc in next 4 sc, holding next sc on TAIL and first sc on TAIL SPIKE together and working through both thicknesses, sc in next 2 sc, sc in next 2 sc on TAIL) 3 times.  (24)
Rd 6: (sc in next 4 sc, sc in next 2 sc on TAIL SPIKE, sc in next 2 sc) 3 times.  (24)
Rd 7: (sc in next sc, holding next sc on TAIL and first sc on TAIL SPIKE together and working through both thicknesses, sc in next 2 sc, sc in next 5 sc) 3 times.  (24)
Rd 8: (sc in next sc, sc in next 2 sc on TAIL SPIKE, sc in next 5 sc on TAIL) 3 times.  (24)
Rd 9: (sc2tog, sc in next 2 sc, sc2tog, holding next sc on TAIL and first sc on TAIL SPIKE together and working through both thicknesses, sc in next 2 sc) 3 times.  (18)
Rd 10: (sc in next sc, sc2tog, sc in next sc, sc2tog on TAIL SPIKE) 3 times.  (12)
BEGIN STUFFING TAIL AT THIS POINT.
Rd 11: (sc2tog) around.  (6)
Rds 12-13: sc in each sc around.  (6)
Rd 14: (sc in next sc, 2 sc in next sc) around.  (9)
Rds 15-16: sc in each sc around.  (9)
Rd 17: (sc in next 2 sc, 2 sc in next sc) around.  (12)
Rd 18: sc in each sc around.  (12)
Rd 19: (sc in next 3 sc, 2 sc in next sc) around.  (15)
Rd 20: sc in each sc around.  (15)
Rd 21: (sc in next 4 sc, 2 sc in next sc) around.  (18)
Rd 22: (sc in next 5 sc, 2 sc in next sc) around.  (21)
Rd 23: (sc in next 6 sc, 2 sc in next sc) around.  (24)
Rd 24: (sc in next 7 sc, 2 sc in next sc) around.  (27)
Rd 25: (sc in next 8 sc, 2 sc in next sc) around.  (30)
Rd 26: slip st in next sc, ch 1, turn, skip next slip st, sc2tog, sc in next 11 sc, sc2tog, slip st in next sc.  (13)
Rd 27: Ch 1, turn; skip next slip st, sc2tog, sc in next 9 sc, sc2tog.  (11)
Rd 28: Ch 1, turn; sc2tog, sc in next 7 sc, sc2tog.  (9)
Rd 29: Ch 1, turn; sc2tog, sc in next 5 sc, sc2tog.  (7)
Rd 30: Ch 1, turn; sc2tog, sc in next 3 sc, sc2tog.  (5)
Rd 31: Ch 1, turn; sc2tog, sc in next sc, sc2tog.  (3)
Finish off leaving a long tail.  Sew TAIL to BODY adding any stuffing needed to achieve desired shape before closing.

EXHAUST PIPES ENDS (MAKE 6):
Rd 1: With gray, 8 sc in magic ring.  (8)
Rd 2: Working in front loops only, sc in each sc around.  (8)
Rd 3: sc in next 4 sc, dc in next 4 sc, slip st in first sc.  (8)
Finish off.  Weave in ends.

BACK EXHAUST PIPES (MAKE 4):
Rd 1: Working in back loops of Rd 1 of EXHAUST PIPES ENDS and working in opposite direction as EXHAUST PIPES ENDS, attach gray, ch 1, sc in each sc around.  (8)
Rds 2-12: sc in each sc around.  (8)
BEGIN STUFFING BACK EXHAUST PIPES FIRMLY.  CONTINUE STUFFING BACK EXHAUST PIPES FIRMLY AS YOU ALONG.
Rds 13-14: sc in next sc, 2 sc in next 2 sc, sc in next sc, (sc2tog) twice.  (8)
Rds 15-16: sc2tog, sc in next sc, 2 sc in next 2 sc, sc in next sc, sc2tog.  (8)
Rds 17-18: (sc2tog) twice, sc in next sc, 2 sc in next 2 sc, sc in next sc.  (8)
Finish off leaving a long tail.  Sew 2 BACK EXHAUST PIPES together.  Sew assembled BACK EXHAUST PIPES to BODY.

SIDE EXHAUST PIPES (MAKE 2):
Rd 1: Working in back loops of Rd 1 of EXHAUST PIPES ENDS and working in opposite direction as EXHAUST PIPES ENDS, attach gray, ch 1, sc in each sc around.  (8)
Rds 2-12: sc in each sc around.  (8)
BEGIN STUFFING SIDE EXHAUST PIPES FIRMLY.  CONTINUE STUFFING SIDE EXHAUST PIPES FIRMLY AS YOU GO ALONG.
Rds 13-14: sc in next sc, 2 sc in next 2 sc, sc in next sc, (dc2tog) twice.  (8)
Rd 15: dc2tog, sc in next sc, 2 sc in next 2 sc, sc in next sc, dc2tog.  (8)
Rd 16: dc in next 2 sts, sc in next 4 sts, dc in next 2 sts.  (8)
Rds 17-18: sc in each st around.  (8)
Finish off leaving a long tail.  Sew SIDE EXHAUST PIPES to BODY.

RIGHT SHOULDER GUN:
RIGHT SHOULDER GUN TUBES (MAKE 3):
Rd 1: With greybeard, ch 2, 4 sc in second ch from hook working around ch.  (4)
Rd 2: Working back loops only, sc in each sc around.  (4)
Rds 3-21: sc in each sc around.  (4)
Finish off.  Cut dowel to be 4.5 inches in length.  Insert dowel in tube.

RIGHT SHOULDER GUN FRONT HOUSING FRONT PLATE:
Rd 1: Working in front loops of Rd 1 of RIGHT SHOULDER GUN TUBES, attach greybeard, ch 1, sc in same sc as attachment, 3 sc in next sc, sc in next sc, sc in next sc on next RIGHT SHOULDER GUN TUBE, sc 3 sc in next sc, sc in next sc, sc in next on next RIGHT SHOULDER GUN TUBE, 3 sc in next sc, sc in next sc, slip st in first sc.  (15)
Finish off.  Weave in ends.

RIGHT SHOULDER GUN BACK HOUSING FRONT PLATE:
Rd 1: Working in front loops of Rd 21 of RIGHT SHOULDER GUN TUBES, attach greybeard, ch 1, sc in same sc as attachment, 3 sc in next sc, sc in next sc, sc in next sc on next RIGHT SHOULDER GUN TUBE, sc 3 sc in next sc, sc in next sc, sc in next on next RIGHT SHOULDER GUN TUBE, 3 sc in next sc, sc in next sc, slip st in first sc.  (15)
Finish off.  Weave in ends.

RIGHT SHOULDER GUN FRONT HOUSING SIDES (MAKE 3):
Rw 1: With gray, ch 9, sc in second ch from hook and in each ch across.  (8)
Rws 2-5: Ch 1, turn; sc in each sc across.  (8)
Finish off leaving a long tail.  Sew RIGHT SHOULDER GUN FRONT HOUSING SIDE together.  Sew RIGHT SHOULDER GUN FRONT HOUSING SIDE to RIGHT SHOULDER GUN FRONT HOUSING FRONT PLATE.  Weave in ends.  Using gray, embroider 5 French knots on each side.

RIGHT SHOULDER GUN CENTER BAND:
Rw 1: With charcoal, ch 17, sc in second ch from hook and in each ch across.  (16)
Finish off leaving a long tail.  Wrap around RIGHT SHOULDER GUN TUBES and sew together.  Tack stitch band to tubes.

RIGHT SHOULDER GUN BACK HOUSING:
Rd 1: Attach charcoal in any sc of Rd 1 of RIGHT SHOULDER GUN BACK HOUSING, ch 1, sc in same sc as attachment, sc in each sc around.  (15)
Rd 2: sc in each sc around.  (15)
Rd 3: (sc in next 3 sc, sc2tog) around.  (12)
Rd 4: sc in each sc around.  (12)
Rd 5: (sc in next 2 sc, sc2tog) around.  (9)
Rd 6: sc in each sc around.  (9)
STUFF RIGHT SHOULDER GUN BACK HOUSING FIRMLY.
Rd 7: (sc in next sc, sc2tog) around.  (6)
Finish off leaving a long tail.  Weave tail through sc of Rd 7, pull tightly and secure.  Sew RIGHT SHOULDER GUN to right SHOULDER.

RIGHT SHOULDER GUN BACK HOUSING POD:
Rd 1: With gray, ch 2, 4 sc in second ch from hook.  (4)
Rd 2: Ch 1, turn; 2 sc in each sc around.  (8)
Rd 3: Working in back loops only, sc in each sc around.  (8)
Rd 4: Ch 1, turn; sc2tog, sc in next 4 sc, sc2tog.  (6)
Rd 5: Ch 1, turn; sc2tog, sc in next 2 sc, sc2tog.  (4)
Rd 6: Ch 1, turn; sc2tog, sc2tog.  (2)
Finish off leaving a long tail.  Sew RIGHT SHOULDER GUN BACK HOUSING POD to RIGHT SHOULDER GUN BACK HOUSING stuffing before closing.

LEFT SHOULDER ROCKET LAUNCHER FRONT:
Rd 1: With gray, ch 10, 2 sc in second ch from hook, sc in next 7 ch, 3 sc in next ch working around ch, working in free loops of foundation ch, sc in next 8 ch, slip st in first sc.  (20)
Rd 2: Ch 1, 2 sc in next 2 sc, sc in next 7 sc, 2 sc in next 3 sc, sc in next 7 sc, 2 sc in next sc, slip st in first sc changing to charcoal.  (26)
Rd 3: Ch 1, (sc in next sc, 2 sc in next sc) twice, sc in next 7 sc, (sc in next sc, 2 sc in next sc) 3 times, sc in next 8 sc, 2 sc in next sc, slip st in first sc.  (32)
Rd 4: Working in back loops only, sc in each sc around, slip st in first sc.  (32)
Rds 5-7: Ch 1, sc in each sc around.  (32)
Finish off.  Weave in ends.  Using gray, embroider 8 French knots on front of LEFT SHOULDER ROCKET LAUNCHER FRONT.

LEFT SHOULDER ROCKET LAUNCHER BACK:
Rd 1: With charcoal, ch 10, 2 sc in second ch from hook, sc in next 7 ch, 3 sc in next ch working around ch, working in free loops of foundation ch, sc in next 8 ch, slip st in first sc.  (20)
Rd 2: Ch 1, 2 sc in next 2 sc, sc in next 7 sc, 2 sc in next 3 sc, sc in next 7 sc, 2 sc in next sc, slip st in first sc.  (26)
Rd 3: Ch 1, (sc in next sc, 2 sc in next sc) twice, sc in next 7 sc, (sc in next sc, 2 sc in next sc) 3 times, sc in next 8 sc, 2 sc in next sc, slip st in first sc.  (32)
Finish off leaving a long tail.  Sew LEFT SHOULDER ROCKET LAUNCHER BACK to LEFT SHOULDER ROCKET LAUNCHER FRONT stuffing before closing.  Sew LEFT SHOULDER ROCKET LAUNCHER to left SHOULDER.

LEFT SHOULDER ROCKET LAUNCHER TOP POD:
Rd 1: With gray, ch 2, 6 sc in second ch from hook.  (6)
Rd 2: Working in back loops only, sc in each sc around.  (6)
Rd 3: Ch 1, turn; sc2tog, sc in next 2 sc, sc2tog.  (4)
Rd 4: Ch 1, turn; sc2tog, sc2tog.  (2)
Finish off leaving a long tail.  Sew LEFT SHOULDER ROCKET LAUNCHER TOP POD to LEFT SHOULDER ROCKET LAUNCHER stuffing before closing.

Rhyperior and Pokemon are copyright Nintendo and their respective creators.

This pattern is an original pattern by Christjan Bee (February 2018). Please do not claim this pattern as your own. If you wish to share this pattern, you may link to this pattern but please do not reprint it on your site. You may keep a copy for your own personal use but you may not sell or distribute it, or sell items made from this pattern.

No comments:

Post a Comment